|
Hot Pipe Coating (HPC) is a unique
combination of high-performance specially designed high-temperature resins
in a water-borne formula. This coating will dry slowly by evaporation and
can be aided in the dry down by adding high heat to the environment. HOT
PIPE COATING was built to be used as the primer coat and build-up
coating applied over hot pipes to achieve immediate adhesion while calming
down the hot surface. Using this coating as the primer and finish coat, we
can achieve adhesion over the hot pipe and create a surface that can be
insulated to stop the loss of heat. It is
water-borne to offer a non-flammable, non-toxic formula for high heat
situations. The technology used in this coating offers a loose set that is
required for quick adhesion while at the same time offering a thick body
of ceramics to immediately calm the heat conduction from the surface of
the pipe to give better adhesion to the refractory or metal surfaces.
APPLICATION METHODS
Surfaces must be clean and dry before application. Loose or flaking old
paints or corrosion must be removed from surface before applying. Surface
must be clean of all residues and debris. Surfaces can be cleaned by power
washing the surfaces or sandblasted as a :brush blast or sweep blast".
This coating can best be applied by using a 5 horsepower 2 1/2 gallon per
minute airless sprayer at 3000 psi (.065 tip) or hopper gun. Apply a thin
coat as the primer over the hot pipe first to lock down and reduce the
surface heat. Wait 15 minutes and apply to the thickness needed for heat
reduction desired. If outside, overcoat with
ENAMOGRIP WB for weathering/UV protection.
|
FEATURES: |
|
|
|
Percent Solid: |
75.2% by volume
60.3% by weight
5.5 pounds/gallon |
|
|
Dry Times: |
15 minutes as primer over hot pipe, then build up as needed
24 hours to set |
|
Spread: |
20 sq. ft. per gallon, giving 50 mil thickness, as primer |
|
Elongation: |
95% |
|
|
pH: |
8.5-9.0 |
|
|
VOC: |
50 grams/liter |
|
|
USDA approved |
|
|
|
|
|
|
|
|
|
COVERAGE:
HOT PIPES -
9.6 sqft/gal at 125 mils
4.8 sqft/gal at 250 mils
2.4 sqft/gal at 500 mils
1.5 sqft/gal at 800 mils
|
NEW*
You can view a video
online that shows how to apply the product. |
CALL
888-507-8762
You will need to obtain a
user name and password to access video(s).
VIEW VIDEOS
|
|
limited warranty: |
|
click to enlarge |
Touching 375 degree pipe after Hot Pipe applied. |
 |
|
